Toshiba tecra 5000 manual
This section provides basic information to start using your computer. It covers the following topics:. General storage media is not durable or stable over long periods of time and under certain conditions may result in data loss. Failure to do so may result in the loss of data. Attach the AC adaptor when you need to charge the battery or you want to operate from AC power. It is also the fastest way to get started, because the battery pack will need to be charged before you can operate from battery power.
The AC adaptor can be connected to any power source supplying from to volts and 50 or 60 hertz. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
Failure to do so could result in a fire or electric shock, possibly resulting in serious injury. For use in other regions, please buy power cords that conform to safety rules and regulations in the particular region. Connecting the power cable to a live electrical outlet should be the last step otherwise the adaptor DC output plug could hold an electrical charge and cause an electrical shock or minor bodily injury when touched.
As a general safety precaution, avoid touching any metal parts. Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions. Plug the power cord into a live wall outlet - the Battery and DC IN indicators on the front of the computer should glow. While holding down the palm rest with one hand so that the main body of the computer is not raised, slowly lift the display panel - this will allow the angle of the display panel to be adjusted to provide optimum clarity.
Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer. This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Power-Up Modes , for more information. Please refer to the section Starting up for the first time for more information. The Windows 7 Startup Screen will be the first screen displayed when you turn on the power.
Follow the on-screen instructions on each screen in order to properly install the operating system. When it is displayed, be sure to read the Software License Terms carefully. If you have entered data, either save it to the hard disk drive or to other storage media.
If you turn off the power while a disk disc is being accessed, you may lose data or damage the disk. Doing so could cause loss of data. Doing so can cause data loss. Click Start. Click the Shut down button. Turn off any peripheral devices connected to your computer. Do not turn the computer or peripheral devices back on immediately - wait a short period to avoid any potential damage.
If you have to interrupt your work, you are able to turn off the power without exiting from your software by placing the computer into Sleep Mode. When you have to turn off your computer aboard an aircraft or in places where electronic devices are regulated or controlled, always completely shut down the computer. This includes turning off any wireless communication switches or devices, and canceling settings that reactivate the computer automatically, such as a timer recording function.
Failure to completely shut down the computer in this way could allow the operating system to reactivate and run pre-programmed tasks or preserve unsaved data, which could interfere with aviation or other systems, possibly causing serious injury.
The computer or the memory module could be damaged. Data in memory could be lost. Please note that keyboard keys can only be used if the Wake-up on Keyboard option is enabled within the HW Setup utility. When you turn the power back on, you can continue where you left when you shut down the computer. The Hibernation Mode feature saves the contents of memory to the hard disk drive when the computer is turned off so that, the next time it is turned on, the previous state is restored.
Please note that the Hibernation Mode feature does not save the status of any peripheral devices connected to the computer. While entering Hibernation Mode, the computer saves the contents of memory to the hard disk drive. However, for safety sake, it is best to save your data manually.
Wait for the Hard Disk Drive indicator to go out. Data will be lost. To enter Hibernation Mode, follow the steps below. The computer can be configured to enter Hibernation Mode automatically when you press the power button or close the lid.
In order to define these settings, you can follow the steps as described below:. Click Start and click the Control Panel. Click System and Security and click Power Options. Click Choose what the power button does or Choose what closing the lid does. Click the Save changes button. When you turn off the power in Hibernation Mode, the computer will take a moment to save the current data in memory to the hard disk drive. During this time, the Hard Disk Drive indicator will glow.
After you turn off the computer, and the content of memory has been saved to the hard disk drive, turn off the power to any peripheral devices. Do not turn the computer or devices back on immediately. Wait a moment to let all capacitors fully discharge. If you need to restart the computer, there are three ways this can be achieved:. Once the computer has turned itself off, wait between ten and fifteen seconds before turning the power on again by pressing the power button.
There is a hidden partition allocated on the hard disk drive for the System Recovery Options. This partition stores files which can be used to repair the system in the event of a problem. The System Recovery Options feature will be unusable if this partition is deleted. The System Recovery Options feature is installed on the hard disk when shipped from the factory. The System Recovery Options menu includes tools to repair startup problems, run diagnostics or restore the system.
See the Windows Help and Support content for more information about. The procedure is as follows. Follow the instructions shown on the on-screen menu. While holding the F8 key, turn on the computer. The Advanced Boot Options menu will be displayed. Use the arrow keys to select Repair Your Computer and press. Follow the on-screen instructions.
Depending on the model you purchased, different ways for restoring the pre-installed software are offered:. Wait for it to finish, then disable virus detection programs including any software that checks files automatically in the background.
They may cause unstable operation and damage data. You should therefore verify the optical disc drive supports the blank media you have chosen before proceeding. Turn on your computer and allow it to load the Windows 7 operating system from the hard disk drive as normal.
Insert the media into the computer. After Recovery Media Creator starts, select the type of media and the title you wish to copy, and then click the Create button. If the pre-installed files are damaged, you are able to either use the Recovery Media you have created or the hard disk drive recovery process to restore the computer to the state it was in when you originally received it.
To perform this restoration, follow the steps below:. Please refer to Chapter 5, The Keyboard , for further details. When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. Use the up and down cursor key to select the appropriate option from the menu according to your actual recovery media. A menu will be displayed from which you should follow the on-screen instructions. To open the setup files,. A portion of the total hard disk drive space is configured as a hidden recovery partition.
This partition stores files which can be used to restore pre-installed software in the event of a problem. If you subsequently set up your hard disk drive again, do not change, delete or add partitions in a manner other than specified in the manual, otherwise you may find that space for the required software is not available. In addition, if you use a third-party partitioning program to reconfigure the partitions on your hard disk drive, you may find that it becomes impossible to setup your computer.
While holding down 0 zero key on the keyboard, turn on your computer. You will receive your Recovery Discs within two weeks after placing your order. Please handle your computer carefully to avoid scratching or damaging the surface.
System indicators These LED indicators allow you to monitor the status of various computer functions and are described in more detail within the System indicators section. Refer to the. Optional devices section in Chapter 3, Hardware, Utilities and Options. Keep foreign metal objects, such as screws, staples and paper clips, out of the Bridge media slot.
Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury.
Interference from a microwave oven or other source can disrupt Wi-Fi or Bluetooth operation. Radio waves may affect pacemaker or medical device operation, possibly resulting in serious injury. Follow the instruction of your medical device when using any wireless functionality.
Radio waves can cause malfunction of such equipment, possibly resulting in serious injury. Please note that it is not possible to confirm the operation of all functions of all USB devices that are available. In view of this it may be noted that some functions associated with a specific device might not operate properly. Do not block the cooling vents.
Keep foreign metal objects, such as screws, staples and paper clips, out of the cooling vents. ExpressCard slot This slot allows you to install a single ExpressCard device. Provided with some models.
Keep foreign metal objects, such as screws, staples and paper clips, out of the PC Card slot. Mini DisplayPort This port is capable of driving resolutions up to x Smart Card slot This slot can accommodate a single Smart Card device. Some models are equipped with a Smart Card slot. Keep foreign metal objects, such as screws, staples and paper clips, out of the Smart Card slot. Headphone jack A 3. Microphone jack A 3. Keep foreign metal objects, such as screws, staples and paper clips, out of the USB connectors.
It could cause damage or malfunction. There may be a remote risk of electric shock from lightning. The following figure shows the underside of the computer. You should ensure that the display is closed before the computer is turned over to avoid causing any damage.
Chapter 3, Hardware, Utilities and Options. Do not attempt to use any other Port Replicator. Refer to the Additional memory module section in. This section shows the computer with the display panel open.
In order to open the display, lift the display panel up and position it at a comfortable viewing angle for you. You need Adobe Reader to view most of our manuals, you can download the latest version of Adobe Reader here.
This website was built by just one person and to keep this web site running on the net costs money. Besides the money there is also the time and the effort which is taken by me for this website Read More Help us! Help You! We keep all your information secret.
What screen dimensions does my Laptop have? The size of your Laptop is usually expressed in inches, 1 inch is 2.
The size is the diagonal size of your Laptop, so you measure the screen from bottom left to top right. What is HDMI? An HDMI cable is used to transport audio and video signals between devices.
How can I best clean my Laptop? A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air. How do I clean my keyboard? Hold the keyboard upside down and use a can of compressed air to blow away the dirt. The keys can even be cleaned with a damp cloth.
0コメント